Product manual
SKU 93458 For technical questions, please call 1-800-444-3353 PAGE 4
19. Fire the Rivets into an appropriate work surface only. This Riveter is designed
for use on metal objects only, and is not suitable for soft surfaces.
20. Do not re the Rivets too close to the edge of a workpiece. They may split the
workpiece and cause it to y free, causing personal injury.
21. Transport the Riveter safely. Disconnect the air supply when moving the tool
in the workplace. Carry the tool by the handle and avoid contact with the Trigger
(40).
22. Avoid working alone. If an accident happens, an assistant can bring help.
23. Attach the Safety Cap (23) to the Riveter before use. Turn the slot in the Safety
Cap upward to avoid spilling used Rivet Pins.
24.
WARNING! Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities contain chemicals known (to the State of Califor-
nia) to cause cancer, birth defects, or other reproductive harm.
Some examples of these chemicals are:
* Lead from lead-based paints,
* Crystalline silica from bricks, cement, and other masonry products,
* Arsenic and chromium from chemically treated lumber.
(California Health & Safety Code § 25249.5, et seq.)
25. WARNING! The warnings, cautions, and instructions discussed in this instruc-
tion manual cannot cover all possible conditions and situations that may occur. It
must be understood by the operator that common sense and caution are factors
which cannot be built into this product, but must be supplied by the operator.