Product manual
SKU 93458 For technical questions, please call 1-800-444-3353 PAGE 5
ASSEMBLY INSTRUCTIONS
1. For best service, you should incorporate an oiler, regulator, and inline lter, as
shown in the diagram above. Hoses, couplers, oilers, regulators, and lters are all
available at Harbor Freight Tools.
Note: If an automatic oiler is not used, put 3-5 drops of pneumatic Tool Oil (not includ-
ed) in the tool’s quick connector before each use.
2. Prior to use, the Riveter requires the attachment of the Quick Connector (53) to its
Air Cylinder (29). To do so, make sure the screen Air Filter is properly seated in
the Air Cylinder. Wrap approximately 3” of pipe thread sealer tape (not included)
around the male threads of the Quick Connector. Then, rmly tighten the Quick
Connector into the Air Cylinder.
To Prime The Riveter:
WARNING! Make sure the Riveter is disconnected from its air supply hose prior to
performing any maintenance, service, or changing accessories.