Product manual

SKU 47791 Page 3

7. Do not overreach. Keep proper footing and balance at all times.

8. Use eye and nose protection. Always wear ANSI approved impact

safety goggles. While spraying, and working around chemical dusts and

mists, wear an ANSI approved dust mask or respirator.

9. Stay alert. Watch what you are doing, use common sense. Do not

operate any tool when you are tired.

10. Check for damaged parts. Before using any tool, any part that appears

damaged should be carefully checked to determine that it will operate

properly and perform its intended function. Check for alignment and

binding of moving parts; any broken parts or mounting ﬁxtures; and

any other condition that may affect proper operation. Any part that

is damaged should be properly repaired or replaced by a qualiﬁed

technician.

11. Replacement parts and accessories. When servicing, use only identical

replacement parts. Use of any other parts will void the warranty. Only use

accessories intended for use with this tool. Approved accessories are

available from Harbor Freight Tools.

12. Do not operate tool if under the inﬂuence of alcohol or drugs. Read

warning labels on prescriptions to determine if your judgment or reﬂexes

are impaired while taking drugs. If there is any doubt, do not operate the

tool.

13. Maintenance. For your safety, service and maintenance should be

performed regularly by a qualiﬁed technician.

14. The Hobby Air Brush Kit is only to be used for spraying paint. Never

spray gasoline, kerosene or any ﬂammable solvent.

Warning: If paint is swallowed or inhaled, immediately contact a physician for

medical attention.

Warning: The warnings, cautions, and instructions discussed in this instruction

manual cannot cover all possible conditions and situations that may occur.

It must be understood by the operator that common sense and caution are

factors which cannot be built into this product, but must be supplied by the

operator.