Product manual

SKU 47791 Page 4

Unpacking

When unpacking, check to make sure the following parts are included.

Ite m # Description

1 Air Brush Body

2 Glass Jar, 1-1/2 oz.

3 Glass Jar, 3/4 oz.

4 Adapter, 1/4", 18 NPT, w/ air control

5 Adapter, 1/4" NPT

6 Hose, Air, 5 feet

If any parts are missing or broken, please call Harbor Freight Tools at the num-

ber on the cover of this manual. Parts List shown above.

Operation

Mixing and Thinning Paints

Generally, paints come thick and have to be diluted before attempting to spray

them with an air brush. Follow these rules for mixing and diluting paints.

1. If mixing colors, only mix together the same type of paints (i.e., lacquer

with lacquer, acrylic with acrylic).

2. Enamel and lacquer paints should be diluted with one part thinner to

one part paint. Read the paint manufacturer’s recommendation for air

brushing.

3. Before spraying, make sure that the diluted paint is

thoroughly mixed.

4. Mix paint in a clean jar. If necessary, strain paint of

any debris before ﬁlling the air brush jar.

Attach Air Hose and Glass Jar

1. Fill the air brush jar with paint to no more than 2/3

full.

2. Carefully screw on the jar lid.

(1)

(2)

(3)

(4)

(5)

(6)