IMPORTANT SAFETY INFORMATION In this manual, on the labeling, and all other information provided with this product: This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. DANGER DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
. Do not overreach. Keep proper footing and balance at all times. This enables better control in unexpected situations. 4. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. PRODUCT USE AND CARE 1. This product is not a toy. Keep it out of reach of children. 2. Use the correct product for your application.
SPECIFICATIONS Capacity Fits most Category 1 Tractors up to 45 HP. Inside Clearance 27-3/16" Maximum Weight Capacity: 2000 lbs., dependent on tractor’s hitch capacity. SET UP INSTRUCTIONS Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
Latch Handle Top Bracket Latch Handle Top Hook Bracket with Clevis Pin (3) R-Pin Lower Hooks Bracket with Clevis Pin Mounting Non-ASAE Implements Note: If the implement does not meet ASAE specifications, use Hitch Adapter (ITEM 29309). To order Hitch Adapter, call 1-888-866-5797. 1. Remove the Top Hook by taking out the two Hex Bolts (2), Lock Washers (6), and Nut (7). Save hardware. 2. Slide the Hitch Adapter over the Top Bracket and secure with Top Link Pin. 3.
MAINTENANCE AND SERVICING CAUTION Damaged products can fail, causing personal injury. Do not use a damaged product. If abnormal noise or vibration occurs, have the problem corrected before further use. Cleaning, maintenance, and lubrication 1. BEFORE EACH USE, inspect the general condition of the product. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, and any other condition that may affect its safe operation. 2.
PARTS LIST & ASSEMBLY DIAGRAM Part Description Qty Part Description Qty 1 Main Frame 1 5 Hook 1 2 Hex Bolt (M12x65) 2 6 Nut (M12) 2 3 Bracket with Clevis Pin 2 7 Lock Washer (M12) 2 4 R-Pin 3 8 Top Link Pin 1 4 8 2 2 6 7 4 1 3 6 4 7 5 3 Record Product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead.
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.