Product manual

Page 2 For technical questions, please call 1-888-866-5797. Item 62179
IMPORTANT SAFETY INFORMATION
1. Do not ride or climb on cart. Keep away from children.
2. Do not exceed 450 lb capacity, evenly distributed.
Be aware of dynamic loading!
Sudden load movement may briefly create
excess load causing product failure.
3. Use only on a flat, level surface able
to support Cart and load.
4. Wear ANSI-approved safety
goggles during assembly.
5. Inspect before every use; do not use
if parts are loose or damaged.
6. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
SAVE THESE INSTRUCTIONS.
Assembly Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
Unwrap and separate all parts on a clear work area.
Attaching Posts to Bottom Tray
Lay the Bottom Tray (2) (the tray with four sets of
four holes on the bottom) on the floor and attach
the Posts (7) to the outside corners of the tray
using sixteen Short Bolt Sets (9) – 1 Short Bolt, 1
Flat Washer, 1 Lock Washer and 1 Nut per set.
Bottom Tray
(2)
Post (7)
Short Bolt
(9)
Flat
Washer
Lock Washer
Nut
Figure 1