Specifications Maximum Capacity Tray Size 500 lb. evenly distributed 30″ L x 16″ W x 3″ Deep (x2) Important Safety Information Assembly Precautions 1. Assemble only according to these instructions. Improper assembly can create hazards. 2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly. 3. Keep assembly area clean and well lit. 4. Keep bystanders out of the area during assembly. 5. Do not assemble when tired or when under the influence of drugs or medication. 6.
Assembly Instructions Note: Use a rubber mallet to ensure snug connection of all nonmetal parts. 1. Place the bases of the four Legs (5,6) into the corners of the Lower Tray (2). The flange on each Post will only fit into certain corners. 2. Insert Carriage Bolts (10) down through the holes in the bases of the Posts (5,6). 3. Attach Casters (8,9) to Carriage Bolts (10) using Split Washers (11) and Nuts (12).
Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY.