Specifications Load Capacity 300 lb. Vehicle Hitch Receiver Size 2" (Vehicle hitch requires a Class III or Class IV tow rating.) Hitch Pin Size 5/8" dia. (with clip) Important Safety Information General Safety 1. Make sure the area in which the Carrier is assembled is clean and well lit. Cluttered or dark areas invite accidents. 2. Keep children and bystanders away while assembling the Carrier. 3. Stay alert, watch what you are doing and use common sense when using the Carrier.
Specific Safety Rules 1. Follow DOT guidelines for installation and use. 2. Do not exceed 300 lb. capacity, evenly distributed. Be aware of dynamic loading! Sudden load movement may briefly create excess load causing product failure. 3. Install sufficiently far away from hot exhaust to prevent heat damage to carrier or cargo. 4. Secure load before moving. 5. Turn vehicle’s ignition OFF, set parking brake, and chock wheels before installing, loading, or unloading. 6. Use as intended only. 7.
Setup - Before Use: Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Note: For additional information regarding the parts listed in the following pages, refer to Parts List and Assembly Diagram on page 7. Assembly Note: Only finger tighten bolts until Carrier is fully assembled. 1. 2. 3. If needed, attach the Receiver Tube to the Post using the two Bolts, Washers and Nuts.
Operation Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product. TO PREVENT SERIOUS INJURY: Make sure the vehicle is turned off and in gear or park, with the emergency brake engaged and the wheels blocked. Make sure the Carrier is secured onto the vehicle. Make sure the Carrier is clean and dry before loading.
Maintenance and Servicing Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY: Remove load from the Carrier before performing any maintenance or service. Do not use damaged equipment. If the Carrier is damaged have the problem corrected before further use. Cleaning, Maintenance, and Lubrication 1. BEFORE EACH USE, inspect the general condition of the Carrier.
Parts List and Assembly Diagram Part 1 2 3 4 5 6 7 Description Qty Post Frame, Left Frame, Right Cross Brace Bolt M8x35 Flat Washer M8 Lock Nut M8 Part 1 1 1 1 2 2 2 Description 8 9 10 11 12 13 Qty Connecting Bolt M10x75 Flat Washer M10 Lock Nut M10 Receiver Tube 3.8 R-Pin 5/8” Hitch Pin 6 6 6 1 1 1 4 6 7 5 3 1 8 13 9 10 2 12 11 Record Serial Number Here: Note: If product has no serial number, record month and year of purchase instead.
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.