User's Manual

ManualsBrandsHarbor Freight Tools ManualsAutomobile PartsHarbor Freight Tools 37792

Trailer Jack

Model 37792

Assembly and Operating Instructions

3491 Mission Oaks Blvd., Camarillo, CA 93011

or any artwork contained herein may be reproduced in any shape or form without the

express written consent of Harbor Freight Tools.

For technical questions and replacement parts, please call 1-800-444-3353.

Summary of content (6 pages)

PAGE 1
Trailer Jack Model 37792 Assembly and Operating Instructions ® 3491 Mission Oaks Blvd., Camarillo, CA 93011 Copyright 1998 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353.
PAGE 2
Important Safety Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. COMMON SENSE AND CAUTION ARE FACTORS WHICH CANNOT BE BUILT INTO ANY PRODUCT. THESE FACTORS MUST BE SUPPLIED BY THE OPERATOR. PLEASE REMEMBER: 1. When using electric tools, machines or equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury. 2. Keep work area clean. Cluttered areas invite injuries. 3. Consider work area conditions.
PAGE 3
Thank you for choosing a Harbor Freight Tools product! For future reference please complete the owner’s record below: Model:_______________ Purchase Date:_________________ SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. IT IS IMPORTANT THAT YOU READ THE ENTIRE MANUAL TO BECOME FAMILIAR WITH THIS PRODUCT BEFORE YOU BEGIN ASSEMBLY. ______________________________________________________________________________ Specifications Purpose: Jack mounts to side of straight trailer tongue.
PAGE 4
Assembly (continued) Screw on the Locking Nut (#11) and tighten the nut securely. 4. Plan the location of the Trailer Jack. Examine both sides of the trailer tongue and choose the appropriate location for the jack, keeping in mind the mounting method, and the need to turn the Crank Handle. The Trailer Jack is designed to be mounted on either side of the trailer tongue, and pivot in either direction (caster wheel forward or to the rear). 5.
PAGE 5
Operation Unhitching: To use the Trailer Jack as an aid in unhitching the trailer, first make sure that the Trialer Jack is securely attached to the trailer tongue. Check out bolt/nut connection to make sure the Trailer Tongue Assembly is properly connected to the trailer tongue. Take the neccessary precautions against uncontrolled trailer movement, and loosen the trailer hitching mechanism.
PAGE 6
Part Number Listing and Parts Diagram Grease Fitting Part # 1 2 3 4 5 6 7 8 9 10 11 12 #37792 Description Jack Shaft Trailer Tongue Assembly Crank Handle Caster Bracket Caster Wheel Bolt M10 x 120 Nylon Locking Nut M10 Washer Bolt M12 x 80 Nylon Locking Nut M12 Nylon Locking Nut M12 Bolt M6 x 20 Quantity 1 1 1 1 1 4 4 4 1 1 1 1 Page 6