Owner's Manual

#38897 Page 8
Step 14: Assemble the Front Panel (#16)
to the Front Cross Brace (#2) and the two
Side Panels (#14) by using 12 Bolts (#21),
12 Washers (#23) and 12 Nuts (#24). Bolt
positions are shown in Figure 14 at right.
Figure 14
Figure 15
Step 15: Assemble the two Front Corner Braces
(#17) to the corners of the Front Panel and the
Side Panels (see Figure 15). For each Front Corner
Brace use 2 Bolts (#21), 2 Washers (#23) and 2
Nuts (#24).
Figure 16
Tailgate Latch (#18)
Tailgate (#20)
Step 16: Attach the two Tailgate
Latches (#18) to the inside of the
Tailgate (#20) using 2 Bolts (#21),
2 Washers (#23) and 2 Nuts (#24)
for each Tailgate Latch (see Figure 16).
Insert the two Tailgate Pins (#19) through
the two holes in lower portion of the Tailgate,
and secure the Tailgate Pins by adding a Washer
(#32) and a Nut (#31) to the threaded portion.
The Tailgate is now ready to be put in place on the Trailer
Cart. Position the Tailgate so that the two Tailgate Pins can be
dropped into the two holes on the Rear Cross Brace (#12). The
Tailgate Latches can now be dropped over the open slots in each Side Panel which will lock the Tailgate in
place. Assembly of the Trailer Cart is complete. Before using the cart make sure all hardware connections are
tight.
(view of inside)
Front Corner Brace (#17)