Product manual

Page 5For technical questions, please call 1-800-444-3353.Item 61368
Assembly Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
Assembling the Wand
1. Insert end of Wand into end of
Wand Handle Assembly.
2. Slide Hose Nut (27) over threaded end of
Handle, then tighten Hose Nut securely.
Wand
Handle
Assembly
Hose
Nut
Wand
Figure B
Changing the Nozzle
1. Loosen Hose Nut (27) and remove Single
Nozzle (53) from end of Wand.
2. Choose another Nozzle:
a. Double Nozzle (54)
b. Fan Nozzle (55)
c. Sprinkler Nozzle (56)
3. Slide Nozzle over end of Wand, slide Hose Nut over
threads of Nozzle, then tighten Hose Nut securely.
Single
Nozzle
Hose
Nut
Double
Nozzle
Fan
Nozzle
Sprinkler
Nozzle
Wand
Figure C
Pump Handle Orientation
To change the side that the Pump Handle is on:
1. Pass the end of the Strap through the
back of the Buckle, then around the bar
until it is free. (See Figure D.)
2. Route the Strap to the other side of the
Tank, then reattach the Strap.
3. Do this to both Straps.
Bar
Figure D