Product manual

Page 6 For technical questions, please call 1-800-444-3353. Item 61368
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
WARNING! Follow all guidelines regarding
chemicals sprayed, including MSDS
instructions and EPA regulations.
CAUTION! If the amount of weight you
can lift safely is limited, do not fill the Tank
completely to prevent strain and injury.
1. Remove Tank Lid and fill Tank, through
a strainer (sold separately), no higher
than top fill line. Replace Tank Lid.
2. Disengage the Pump Handle from
the Pump Handle Lock.
Pump
Handle
Lock
Pump
Handle
Figure E
3. Strap the Sprayer to your back.
4. Raise and lower the Pump handle to
build up sufficient pressure.
5. Adjust Shoulder straps as needed.
6. Point the Nozzle toward the area to be sprayed,
then depress the Trigger to begin spraying.
7. For continuous spray, press the Trigger
down and push the Trigger Lock back, then
release the Trigger. To stop continuous spray,
press the Trigger down and push the Trigger
Lock forward, then release the Trigger.
Trigger
Trigger
Lock
Trigger Lock On
Trigger
Trigger
Lock
Trigger Lock Off
Figure F
8. As you spray, the Sprayer will depressurize.
When decreased pressure is affecting spray
pattern, pump the Pump Handle until proper
pressure is achieved, then resume spraying.
9. When finished spraying:
a. Point Wand is safe direction and depressurize
the Tank by pressing down on the Trigger.
b. Dispose of liquid according to
manufacturer guidelines.
c. Clean the Sprayer according to
Maintenance Instructions.