Product manual

Page 8 For technical questions, please call 1-800-444-3353. Item 61368
Troubleshooting
Problem Possible Causes Likely Solutions
Unit does not spray
1. Not enough liquid in tank.
2. Sprayer not pressurized.
3. Tank Lid loose.
4. Hose Nuts loose.
5. Pump Lid (12) loose.
6. Spray fluid contains particles or
sand.
7. Nozzle and/or Filter clogged
with mineral buildup.
1. Add liquid to tank.
2. Pump Handle to pressurize Sprayer.
3. Tighten Tank Lid.
4. Tighten Hose Nuts.
5. Tighten Pump Lid.
6. Disassemble, clean, then reassemble
Nozzle and/or Wand Handle and
Tank Filters. Empty, clean, then refill
Tank with properly strained fluid.
7. Disassemble, clean, then reassemble Nozzle
and/or Wand Handle and Tank Filters.
Spray pattern is undesirable
1. Spray fluid contains particles or
sand.
2. Nozzle and/or Filter clogged
with mineral buildup.
1. Disassemble, clean, then reassemble
Nozzle and/or Wand Handle and
Tank Filters. Empty, clean, then refill
Tank with properly strained fluid.
2. Disassemble, clean, then reassemble Nozzle
and/or Wand Handle and Tank Filters.
Follow all safety precautions whenever diagnosing or servicing the Sprayer.
™