Specifications Item Base Jaw Opening Anvil Size Base 61553 61551 360° Swivel Base 4-5/8″ Maximum 5-1/2″ Maximum 2-3/4″ x 2-5/8″ 3-1/2″ x 3-1/2″ 5″ x 5″ 5-3/4″ x 5-3/4″ Important Safety Information 9. Inspect before every use; do not use if parts are loose or damaged. 1. Mount before use according to these instructions. Improper mounting can create hazards. 2. Wear ANSI-approved safety goggles and heavy-duty work gloves during mounting and use. 3. Keep work area clean and well lit. 4.
Mounting Instructions 1. 2. Use the mounting holes on the Base as a template to mark drill points. Set the Vise flat on the workbench so that the mounting holes are positioned as desired. With a pencil, mark the points at which to fasten the Vise onto the workbench. Set the Vise aside. 3. Carefully set the Base with the Mounting Holes corresponding to the holes previously drilled through the top of the workbench.
Parts List and Diagram Part 1 2 3 4 5 6 Description Base Jaw Base Handle Swivel Base Handle Base Nut (not shown) 2 Qty 1 2 2 1 1 1 5 4 Note: Specify vise item number when ordering parts. Record Serial Number Here: 3 1 Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Limited 90 Day Warranty Harbor Freight Tools Co.