Product manual

Assembling Casters: 2 bolts secure each caster. From underside of caster
frame, slip both bolts through frame. From topside of frame, add sleeve to
each bolt. Insert both bolts with sleeve through underside of Creeper body.
From topside of body, add flat washer and securely tighten each bolt in
place with nut. Frequently check to insure all caster hardware is tight.
ITEM 02745
40” PVC Creeper
Weight Capacity = 250 Lbs.
1. Always wear ANSI approved safety goggles when assembling this product and when working with tools and equipment.
2. Never exceed the 250 Lbs. weight capacity; capacity lowers if weight is unevenly distributed on the Creeper.
3. Only use Creeper on a flat level, solid surface.
4. Block vehicle’s wheels before using Creeper. DO NOT REMOVE THIS WARNING LABEL. Made in China.
Never
stand on Creeper.