Product manual

SKU 92862 / 92865 For technical questions please call 1-800-444-3353. Page 4
Locate the second Table Board and turn it upside down. Set the second Table Board 5.
(3) onto the Legs (7 & 8) making certain that both Table Boards (3) are facing the
same way.
Turn the Service Cart right-side up. Set the Covers (1 and 2) down onto each corner 6.
of the top Table Board (3) - see Assembly diagram step 4.
Caster marked
with “R”
Table Board (3)
Swivel Caster (9)
Figure 1
7. Turn the Service Cart upside down again. As necessary, attach one Wheel (11) to
each of the two Swivel Casters (9) using one Bolt (12) and secured in place with Nut
(10) - see Figure 1 and Assembly diagram step 5.
As necessary, attach one Wheel (11) to each of the two Fixed Casters (13) with Bolt 8.
(12), and Nut (10).
Place the two Casters marked “R” on the same side of the Table Board as the Handle 9.
(5)- see Figure below.
Thread Bolts (17) down through the Table Board (3) and into the Casters (9 and 13). 10.
Slide on Split Washer (14) and thread on Nuts (16).
Turn the Service Cart upright. Make certain that all hardware is tight. Make certain 11.
that the Fixed Casters (13) and Swivel Casters (9) roll properly.
Note: Some parts are listed and shown for illustration purposes only and are not available
individually as replacement parts.
REV 07g
PARTS LIST
Part Description Quantity
1 Cover 2
2 Cover 2
3 Table Board 2
4 Screw 12
5 Handle 1
7 Leg 2
8 Leg 2
9 Swivel Caster 2
PARTS LIST
Part Description Quantity
10 Nut 4
11 Wheel 4
12 Bolt 4
13 Fixed Caster 2
14 Split Washer 16
16 Nut 16
17 Bolt 16
18 Rod 1