Important Safety Information 1. Wear ANSI-approved safety goggles and heavy-duty work gloves during use. 2. Keep bystanders out of the area during use. 3. Do not use when tired or when under the influence of drugs or medication. 4. This product is not a toy. Do not allow children to play with or near this item. 5. Use as intended only. 6. Keep work area clean and well lit. 7. Inspect before every use; do not use if parts are loose or damaged. Do not use cracked or chipped tap/die. 8.
Die Instructions DIES are used to cut (threading) or clean (chase) external threads, such as on a screw or threaded rod. NOTE: It will be easier to start the Die correctly if the end of the work material is slightly chamfered with a grinder or file (not included). 1. 2. 3. Select the proper Die size for the rod to be threaded. The Die can be no larger than the rod stock, and should be .005″ to .010″ smaller. Oversized rod stock may damage the die, and will make turning it difficult.
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.