Owner's Manual

ManualsBrandsHarbor Freight Tools ManualsPower EquipmentHarbor Freight Tools 46095

10 DRIP NOZZLE WATERING

DRIP KIT

ASSEMBLY AND OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www.harborfreight.com

manual or any artwork contained herein may be reproduced in any shape or form

without the express written consent of Harbor Freight Tools.

For technical questions and replacement parts, please call 1-800-444-3353

Model 93261 / Model 46095

TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND

ALL WARNINGS AND INSTRUCTIONS BEFORE USE.

REV 07/05

Due to continuing improvements, actual product may differ slightly from the product described herein.

Summary of content (7 pages)

PAGE 1
0 DRIP NOZZLE WATERING DRIP KIT Model 93261 / Model 46095 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USE. Copyright© 2005 by Harbor Freight Tools®. All rights reserved.
PAGE 2
PRODUCT SPECIFICATIONS Item Hose Length/Diameter Maximum Operating Pressure Accessories Approximate Unit Weight Description Model 93261: 150 Ft., ¼” O.D. x 3/16” I.D. Model 46095: 100 Ft., ¼” O.D. x 3/16” I.D. 55 PSI Faucet to Hose Connector (Qty. 1) / Threaded Adapter Coupler (Qty. 1) Water Pressure Regulator (Qty. 1) / Faucet Gasket (Qty. 1) Faucet Gasket w/Filter Screen (Qty. 1) / Hose Tee (Qty. 14) Plastic Tube (Qty. 5) / Tie-Down Stake (Qty. 15) Plastic Hose Coupler (Qty.
PAGE 3
Do not use electrically powered tools in the presence of flammable gases or liquids. 3. Keep children away. Children must never be allowed in the work area. Do not let them handle machines, tools, or extension cords. 4. Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children. 5. Do not force the product. It will do the job better and more safely at the rate for which it was intended.
PAGE 4
accessories intended for use with this tool. 15. Do not operate this product if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the product. 16. Maintenance. For your safety, service and maintenance should be performed regularly by a qualified technician.
PAGE 5
2. Hand tighten all connections if possible. If pliers are used, care must be taken not to overtighten components as they may break. (See Figure A.) 3. Cut the end of the Hose (1 or 1A) at an angle. This will allow easier insertion into the Faucet Hose Connector (2). Press and twist hose in 1/2 inch. (See Figure A.) 4. Route the Hose along the desired watering locations. (See Figure B.) 5. If necessary, use the Hose Nail-down Clips (12) to secure the Hose to a wooden rail, pot, or other fixture.
PAGE 6
doubling over the Hose end and forcing it over the doubled Tube. 12. Turn on the water and check each Drip Nozzle for dripping water. If the flow is too slow, try removing the Water Pressure Regulator (4) and retest the flow once again. If there are leaks in the Faucet Couplings, hand tighten once again or remove and reassemble them using pipe sealant tape (not included) on the threads. MAINTENANCE 1. Remove and clean out the Faucet Gasket with Filter Screen (6) every month. 2.
PAGE 7
PARTS LIST AND ASSEMBLY DIAGRAM Part # 1 1A 2 3 4 5 6 7 8 9 10 11 12 13 14 Description Hose, Neoprene, ¼” O.D. x 3/16” I.D. (Model 93261) Hose, Neoprene, ¼” O.D. x 3/16” I.D.