Product manual

Page 5For technical questions, please call 1-800-444-3353.Item 69702
SAFETYOPERATIONMAINTENANCE SETUP
e. Do not use dull or damaged blades.
Unsharpened or improperly set blades
produce narrow kerf causing excessive
friction, blade binding and kickback.
f. Blade depth adjusting locking lever must
be tight and secure before making cut.
If blade adjustment shifts while cutting,
it may cause binding and kickback.
g. Use extra caution when making a
″plunge cut″ into existing walls or other
blind areas. The protruding blade may
cut objects that can cause kickback.
10. Check lower guard for proper closing before
each use. Do not operate the saw if lower
guard does not move freely and close instantly.
Never clamp or tie the lower guard into the
open position. If saw is accidentally dropped,
lower guard may be bent. Raise the lower guard
with the retracting handle and make sure it
moves freely and does not touch the blade or
any other part, in all angles and depths of cut.
11. Check the operation of the lower guard spring.
If the guard and the spring are not operating
properly, they must be serviced before use.
Lower guard may operate sluggishly due to damaged
parts, gummy deposits, or a build-up of debris.
12. Lower guard should be retracted manually
only for special cuts such as ″plunge cuts″
and ″compound cuts.″ Raise lower guard
by retracting handle and as soon as blade
enters the material, the lower guard must
be released. For all other sawing, the lower
guard should operate automatically.
13. Always observe that the lower guard is covering
the blade before placing saw down on bench
or floor. An unprotected, coasting blade will cause
the saw to walk backwards, cutting whatever
is in its path. Be aware of the time it takes for
the blade to stop after Trigger is released.
14. DO NOT USE THIS SAW WITH THE
SAW HELD UPSIDE DOWN IN A VISE.
The saw is not designed for such use and
cannot be used safely in that position.
15. Do not use abrasive blades or masonry-cutting
blades. The guards of this saw are not designed
to protect against the failure of such blades.
16. Place the larger portion of the saw base on
the larger, supported part of the workpiece.
This will help maintain balance and
control while the cut is completed.
17. Blades must be rated to at least the
maximum speed marked on the tool.
18. Maintain labels and nameplates on the tool.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
19. Avoid unintentional starting.
Prepare to begin work before turning on the tool.
20. Do not lay the tool down until it has come to
a complete stop. Moving parts can grab the
surface and pull the tool out of your control.
21. When using a handheld power tool,
maintain a firm grip on the tool with both
hands to resist starting torque.
22. Do not depress the spindle lock when
starting or during operation.
23. Do not leave the tool unattended when it is plugged
into an electrical outlet. Turn off the tool, and
unplug it from its electrical outlet before leaving.
24. This product is not a toy.
Keep it out of reach of children.
25. People with pacemakers should consult their
physician(s) before use. Electromagnetic fields in
close proximity to heart pacemaker could cause
pacemaker interference or pacemaker failure.
In addition, people with pacemakers should:
•Avoidoperatingalone.
•DonotusewithTrigger locked on.
•Properlymaintainandinspecttoavoid
electrical shock.
•Properlygroundpowercord.GroundFaultCircuit
Interrupter (GFCI) should also be implemented
– it prevents sustained electrical shock.
26. WARNING: Some dust created by power sanding,
sawing, grinding, drilling, and other construction
activities, contains chemicals known [to the State
of California] to cause cancer, birth defects or
other reproductive harm. Some examples of
these chemicals are:
•Leadfromlead-basedpaints
•Crystallinesilicafrombricksandcementor
other masonry products
•Arsenicandchromiumfrom
chemically treated lumber
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
filter out microscopic particles.
(California Health & Safety Code § 25249.5, et seq.)
27. WARNING: Handling the cord on this product will
expose you to lead, a chemical known to the State of
California to cause cancer, and birth defects or other
reproductive harm. Wash hands after handling.
(California Health & Safety Code § 25249.5, et seq.)