Specifications Load Capacity 500 lb. Vehicle Hitch Receiver Size 2" (Vehicle hitch requires a Class III or better tow rating.) Inside Platform 52" L x 17-3/4" W x 4" H Exterior Platform 53-1/2" L x 19-1/2" W x 4-3/4" H Overall Dimensions 53-1/2" L x 27-1/2" W x 6" H Important Safety Information Specific Safety Rules 1. Follow DOT guidelines for installation and use. 2. Do not exceed 500 lb. capacity, evenly distributed.
General safety 1. Make sure the area in which the Carrier is assembled is clean and well lit. Cluttered or dark areas invite accidents. 2. Keep children and bystanders away while assembling the Carrier. 3. Stay alert, watch what you are doing and use common sense when using the Carrier. Do not use the Carrier while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while using the Carrier may result in serious personal injury. Carrier use and care 1.
Assembly Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Note: For additional information regarding the parts listed in the following pages, refer to Parts List and Assembly Diagram on page 7. Note: Only finger tighten bolts until Carrier is fully assembled. Left Frame 1.
Functions Carrier R-Pin Post Hitch Pin Figure C: Components Operation Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product. TO PREVENT SERIOUS INJURY: Make sure the vehicle is turned off and in gear or park, with the emergency brake engaged and the wheels blocked. Make sure the Carrier is secured onto the vehicle. Make sure the Carrier is clean and dry before loading.
Maintenance and Servicing Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY: Remove load from the Carrier before performing any maintenance or service. Do not use damaged equipment. If the Carrier is damaged have the problem corrected before further use. Cleaning, Maintenance, and Lubrication 1. BEFORE EACH USE, inspect the general condition of the Carrier. Check for: 2. Clean the Carrier after each use.
Parts List and Assembly Diagram Part 1 2 3 4 5 6 Description Qty Post Right Frame Left Frame R-Pin Hitch Pin Cross Brace 12 2 5 1 4 Part 1 1 1 1 1 2 7 8 9 10 11 12 11 9 Description Bolt M8x35 Washer M8 Lock Nut M8 Bolt M10x80 Washer M10 Nut M10 8 7 6 Qty 2 8 4 4 4 4 10 3 Record Serial Number Here: Note: If product has no serial number, record month and year of purchase instead.
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.