Product manual

Page 4 For technical questions, please call 1-800-444-3353. Item 66983

Assembly

Read the ENTIRE IMPORTANT SAFETY INFORMATION section

at the beginning of this manual including all text under

subheadings therein before set up or use of this product.

Note: For additional information regarding the parts listed in the following pages,

refer to Parts List and Assembly Diagram on page 7.

Note: Only finger tighten bolts until Carrier is fully assembled.

1. Align the mounting holes on the ends

of the Right Frame (2) and Left Frame

(3) with the mounting holes along the

sides of the Post (1). Fasten the

Frames to the Post using the Bolts

(10), Washers (11), and Nuts (12).

2. Set the Cross Braces (6) over the

Frames (2,3) and fasten the Cross

Braces to the Frames using the Bolts

(7), Washers (8), and Lock Nuts (9).

3. Use a wrench (not included) to tighten all bolts securely.

Figure A

Right Frame

Left Frame

Post

Figure B

Cross Brace

Frame hole