Product manual

Page 5SKU 95607
For technical questions, please call 1-800-444-3353.
of unauthorized parts or failure to follow maintenance instructions may create a risk
of electric shock or injury.
SPECIFIC SAFETY RULES
Maintain labels and nameplates on the Mini Lathe. These carry important
information. If unreadable or missing, contact Harbor Freight Tools for a
replacement.
Direction of feed. Feed tool into workpiece against the direction of the workpiece
only.
Avoid unintentional starting. Make sure you are prepared to begin work before
turning on the Mini Lathe.
Never leave the Mini Lathe unattended when it is plugged into an electrical
outlet. Turn off the tool, and unplug it from its electrical outlet before leaving.
Never stand on tool. Serious injury could occur if the tool is tipped or if the cutting
tool is unintentionally contacted.
WARNING! People with pacemakers should consult their physician(s) before using
this product. Electromagnetic fields in close proximity to a heart pacemaker could
cause interference to or failure of the pacemaker.
WARNING! Some dust created by power sanding, sawing, grinding, drilling, and
other construction activities, contain chemicals known (to the State of California)
to cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
Lead from lead-based paints.
Crystalline silica from bricks and cement or other masonry products.
Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well-ventilated area,
and work with approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
(California Health & Safety Code § 25249.5, et seq.)
1.
2.
3.
4.
5.
6.
7.
•
•
•