Table of Contents Safety.......................................................... 2 Specifications.............................................. 6 Operation..................................................... 6 Maintenance................................................ 7 Parts List and Diagram................................ 7 Warranty...................................................... 8 SAFETY OPERATION WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol.
. Do not expose tools to rain or wet conditions. Water entering a tool will increase the risk of electric shock. Personal safety 1. Stay alert, watch what you are doing and use common sense when operating a tool. Do not use a tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating tools may result in serious personal injury. 2. Use personal protective equipment. Always wear eye protection.
Ventilator Safety Warnings 1. Connect to GFCI outlet only. 2. Keep children away from ventilator. Small fingers can be inserted through grill. SAFETY 3. Do not use near flammable fumes or dust. Ventilator has internal arcing parts that will ignite flammable fumes/dust. 4. Do not use without guard in place. 5. Do not reposition the fan while in use. 6. Unplug after use. 7. Inspect before use; do not use if parts loose or damaged. OPERATION 8. Keep inlet and outlet clear during use. 9.
TO PREVENT ELECTRIC SHOCK AND DEATH FROM INCORRECT GROUNDING WIRE CONNECTION: Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the grounding prong from the plug. Do not use the tool if the power cord or plug is damaged. If damaged, have it repaired by a service facility before use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician.
Symbology A Double Insulated SAFETY V~ WARNING marking concerning Risk of Fire. Do not cover ventilation ducts. Keep flammable objects away. WARNING marking concerning Risk of Electric Shock. Properly connect power cord to appropriate outlet. Amperes ETL Standards Association WARNING marking concerning Risk of Eye Injury. Wear ANSI‑approved safety goggles with side shields. Volts Alternating Current Read the manual before set-up and/or use. Specifications Electrical Rating 120V~ / 60Hz / 1.
Maintenance and Servicing SAFETY Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Turn the Power Switch of the tool off and unplug the tool from its electrical outlet before performing any procedure in this section. TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
