PROPANE TORCH MODEL 91033 ASSEMBLY AND OPERATING INSTRUCTIONS ® 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http//www.harborfreight.com Copyright 2003 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions, please call 1-800-444-3353.
PRODUCT SPECIFICATIONS Item P roduct Com patibility O verall Length W and Length M axim um B TU ’s M axim um Flam e Tem perature H ose Length H ose Fittings H ose W orking P .S .I. H ose B urst P .S .I. W eight A ccessories D escription D esigned for U se with S tandard 20 Lbs., Barbeque L.P . (P ropane) Tanks 23” w ithout H ose 21-1/2” 500,000 3,500 D egrees 6 Ft. 6” 14 T.P .I. x .089” D iam eter H andle Fitting 1/2” O .D ., L.H . Threaded M ale P ropane Tank C onnection 350 Lbs 525 Lbs 3.
are impaired while taking drugs. If there is any doubt, do not attempt to use this product. 5. Use eye and hand protection. Wear ANSI approved safety impact eye goggles and flame retardant gloves when using this product. ANSI approved safety impact eye goggles and flame retardant gloves are available from Harbor Freight Tools. 6. Dress safely. Do not wear loose clothing or jewelry, as they can become caught in moving parts or come in contact with open flames.
SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS 1. Maintain a safe working environment. Keep the work area well lit. Make sure there is adequate surrounding work space. Always keep the area free of obstructions, grease, oil, trash, and other debris. Do not use the Propane Torch in areas near flammable chemicals, dusts, and vapors. Be aware of wind blown sparks. Do not use the Propane Torch around or near buildings and structures. 2. The Propane Torch is for outdoor use only.
11. Never use gasoline, kerosene, or other highly volatile fluids as a starter as they can explode. 12. Dress safely. Do not wear loose clothing such as hanging shirt tails and coats. Wear a protective hair covering to keep long hair away from heat and flames. Use ANSI approved safety impact goggles and flame retardant gloves to avoid burns. 13. Never leave the Propane Torch unattended once it is lit. 14. Keep a fire extinguisher handy.
PRODUCT FEATURES 1. The Propane Torch is ideal for de-icing, removing paint (only from non-flammable surfaces), removing weeds (only in a controlled, safe environment, and softening asphalt for removal or patching. In addition, the Propane Torch easily attaches to standard 20 Lbs., Barbeque L.P. (propane) tanks (not included). ASSEMBLY AND OPERATING INSTRUCTIONS NOTE: For additional references to the parts listed in the following pages, refer to the Assembly Diagram (page 8).
6. Adjust the flame to the desired level by turning the Hand Wheel (6) counterclockwise. (See Figure A.) 7. NOTE: The lit Propane Torch should operate with a blue flame with a small yellow tip. If necessary, adjust the Hand Wheel (6) if there is sputtering or popping. (See Figure A.) 8. Pressing the Lever (19) down toward the Handle (11) will intensify the size of the flame. Releasing the Lever will bring the flame back to its previous size. (See Figure A.
PARTS LIST Part # 1 2 3 4 5 6 7 8 9 10 11 12 Description Burner (Turbo 060) Nozzle Hole Nozzle Connector Steel Tube Extension O-Ring Hand Wheel Nut (M4) Needle Guide Nut Tap Casing Iron Tube Handle Hose Connector Part # 13 14 15 16 17 18 19 20 21 22 23 24 Description Packing O-Ring Nut (M4) Piston Lever Jamming Piston Nut Jamming Lever Pin Lever Steel Spring Hose Clip Handle Connector Cylinder Connector ASSEMBLY DIAGRAM 7 6 5 8 2 18 4 10 11 9 13 17 14 20 16 12 15 19 3 1 23 22 21 22 24 NOTE: So