Router User Manual

SKU 91130 For technical questions, please call 1-800-444-3353. Page 12

ASSEMBLY INSTRUCTIONS

NOTE: For additional references to the parts listed in the following pages, refer to the

Assembly Diagrams on pages 28, 29, 30, 31, and 32.

To Assemble The Base:

1. Place one Table (8A)

upside down

on a level floor surface. Attach a Support

Board 1 (2A) to opposite corners of the Table, and attach a Support Board 2 (1A)

to the two remaining opposite corners of the Table using Screws (3A), Washers

(6A), and Plastic Nuts (7A). Repeat this procedure for the remaining two Tables

(8A). (See Figure F.)

2. Hold Support Leg 1 (4A) and Support Leg 2 (9A) together with their mounting

holes aligned. Then, align the mounting holes of the Support Legs with the three

mounting holes in Support Board 1 (2A) and Support Board 2 (1A). Secure the

Support Legs to the Support Boards, using Screws (3A), Washers (6A), and

Plastic Nuts (7A). (See Figure F.)

SUPPORT

BOARD 1

(2A)

SUPPORT

BOARD 2

(1A)

FRONT

VIEW

(UPSIDE DOWN)

END

VIEW

(UPSIDE DOWN)

FRONT

VIEW

(RIGHT SIDE UP)

FIGURE F

SCREW (3A)

WASHER (6A)

PLASTIC NUT (7A)

SUPPORT LEG 2

(9A)

SUPPORT LEG 1

(4A)

TABLE (8A)