Chipper/Shredder User's Manual

2. Dress properly. Do not wear loose clothing or jewelry. Contain long hair.
Keep your hair, clothing, and gloves away from moving parts. Loose
clothes, jewelry, or long hair can be caught in moving parts.
3. Avoid accidental starting. Be sure the Power Switch is off before plugging
in. Plugging in power tools with the Power Switch on invites accidents.
4. Remove adjusting keys or wrenches before turning the power tool on. A
wrench or a key that is left attached to a rotating part of the power tool may result
in personal injury.
5. Do not overreach. Keep proper footing and balance at all times. Proper
footing and balance enables better control of the power tool in unexpected
situations.
6. Always wear eye, hearing, breathing protection, and heavy duty
work gloves. Wear ANSI approved safety impact goggles, ANSI ap-
proved hearing protectors, ANSI approved dust mask or respirator, and
heavy duty work gloves when using this product. Also, non-skid safety
shoes and a hard hat must be used for appropriate conditions.
TOOL USE AND CARE
1. Do not force the tool. Use the correct tool for your application. The correct
tool will do the job better and safer at the rate for which it is designed.
2. Do not use the power tool if the Power Switch or Safety Shut-Off Switch
does not turn it on or off. Any tool that cannot be controlled with the Power
Switch or Safety Shut-Off Switch is dangerous and must be replaced.
3. Disconnect the Power Cord Plug from the power source before
making any adjustments, changing accessories, or storing the tool.
Such preventive safety measures reduce the risk of starting the tool
accidentally.
4. Store idle tools out of reach of children and other untrained persons. Tools
are dangerous in the hands of untrained users.
5. Maintain tools with care. Keep tools clean. Properly maintained tools are
easier to control. Do not use a damaged tool. Tag damaged tools “Do not use”
until repaired.
SKU 92281 For technical questions, please call 1-800-444-3353. PAGE 4
6. Check for misalignment or binding of moving parts, breakage of parts, and