ROTARY LASER LEVEL KIT Model 92801 OPERATING INSTRUCTIONS ® 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USE. Copyright © 2005 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
PRODUCT SPECIFICATIONS Item Power Supply Description 4 "C" Size Batteries Leveling Method Two-Screw Manual Horizontal & Ver tical Measuring Accuracy +/- 0.5mm (1/4" up to 33') Visible Range ~100' Maximum for Dot, ~30' Maximum for Line (Varies Depending on Work Area Illumination) Rotation Capacity 360° Rotation Speed 0 to 600 RPM (Variable) Includes Laser Enhancement Goggles, Tripod, Case, 4 "C" Batteries Unit Weight 3.90 Pounds NOTE: No replacement parts are available for this product.
which may ignite the dust or fumes. 3. Keep bystanders, children, and visitors away while operating this tool. Distractions can cause you to lose control. Protect others in the work area from the laser beam. Provide barriers or shields as needed. PERSONAL SAFETY 1. Stay alert. Watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while tired or under the influence of drugs, alcohol, or medication.
10. Use safety equipment. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions. The included laser enhancement glasses are NOT intended to protect your eyes in any way. TOOL USE AND CARE 1. Do not force the tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed. 2. Do not use the tool if the Power Switch does not turn it on or off.
SPECIFIC SAFETY RULES 1. WARNING! Laser light can harm the eye. Do not look directly into this Laser Level, or the reflection of the light. Do not allow any other person or animal to be exposed to the direct or reflected laser beam. If necessary, wear protective laser goggles (not included) appropriate for this laser type to protect yourself and others from harmful laser beams. 2. Make sure the laser beam is aimed at a sturdy object without reflective surfaces.
accessories, performing inspection, maintenance, cleaning procedures, or storing the tool. 10. Battery precautions: Never burn Batteries, as they can explode in a fire. Contact local solid waste authorities for instructions on correct disposal or recycling of the Batteries. 11. Industrial applications must follow OSHA requirements. 12. Use the right tool or attachment for the right job. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool or attachment.
2. If using the Laser Level with the Tripod (3), thread the Tripod Stud located on the Tripod Neck into the bottom of the Laser Level. The Tripod swivels 360 degree. Position the Tripod on a flat, level, dry ground surface. Extend the Legs of the Tripod and lock the Legs in place. Level the Tripod Neck (4), using the Level Vial (4) located on the Tripod Head. Then, lock the Tripod Neck in position with the Thumb Screw (6). (See Figure B.
OPERATING INSTRUCTIONS 1. When the Laser Level is properly positioned, turn on the Laser by rotating the Rotation Speed Control (10), clockwise. Then, recheck the Level Vials (4, 9) to make sure the Laser Level has not been bumped or moved. (See Figures B and C.) 2. The rotation speed can be set by adjusting the Rotation Speed Control (10) knob. Turn the Control clockwise to make the beam rotate faster. Turn the Control counterclockwise to slow the beam down. 3. Mark the desired measurement.
INSPECTION, MAINTENANCE, AND CLEANING 1. WARNING! Always turn the Power Switch (11) to its “OFF” position, and remove the Batteries from the tool before performing any inspection, maintenance, or cleaning. 2. Before each use: Inspect the general condition of the Laser Level. Check for misalignment or binding of moving parts, cracked or broken parts, leaking Batteries, and any other condition that may affect its safe operation.