Owner's Manual
SKU 94071 For technical questions, please call 1-800-444-3353 PAGE 10
OPERATING INSTRUCTIONS
1.
GRINDING
WHEEL
BUFFING
WHEEL
ONOFF
POWER
SWITCH
Movable
TOOL REST
FIGURE F
Connect the Power Cord/Plug of
the Grinder to the nearest 120 volt,
grounded, electrical outlet.
(See Figure F.)
2. WARNING! ALWAYS
wear ANSI-approved safety
impact eye glasses underneath
an ANSI-approved safety
impact full face shield when
operating the Grinder.
3. Turn the Power Switch to its “ON”
position, and allow the Bufng
Wheel and Grinding Wheel to spin
up to full speed. (See Figure F.)
4. Place the object you are bufng or
grinding rmly against the Movable
Tool Rest and slowly feed the object
into the revolving Bufng Wheel or
Grinding Wheel. (See Figure F.)
5. CAUTION! Keep hands away
from the Bufng Wheel and Grinding
Wheel. Also, make sure to hold the
object you are bufng or grinding
rmly against the Movable Tool
Rest throughout the bufng/grinding
process. Failure to do so may
cause the object to be propelled
by the Bufng Wheel or Grinding
Wheel toward your body and/or
into the Grinder. (See Figure F.)
6. Once the grinding process is
competed, turn the Power Switch of
the Grinder to its “OFF” position. Do
not press against the Bufng Wheel
or Grinding Wheel to stop them
from spinning. Allow the Wheels to
completely stop on their own. Then,
disconnect the Power Cord/Plug from
its electrical outlet. (See Figure F.)
7. Keep the Grinder in an area
out of reach of children and
other unauthorized people.
REV 11a