Owner's Manual

SKU 94071 For technical questions, please call 1-800-444-3353 PAGE 11
INSPECTION, MAINTENANCE,
AND CLEANING
1. WARNING! Turn the Grinder’s
Power Switch to its “OFF”
position and unplug the tool
from its electrical outlet before
performing any inspection,
maintenance, or cleaning.
2. Before each use: Inspect the
general condition of the Grinder.
Check for misalignment or binding
of moving parts, loose, cracked or
broken parts, damaged Power Cord,
and any other condition that may
affect its safe operation. If a problem
occurs with the Grinder, have the
problem corrected before further use.
Do not use damaged equipment.
3. To install a Bufng Wheel:
Note: Use both Wrenches
when installing and removing
Buffer and Grinding Wheels.
a. Remove the Left Safety Guard
Cover from the Grinder by
unscrewing and removing Hex Nut.
IMPORTANT: The Hex Nut on the
Bufng Wheel is a LEFT threaded
Hex Nut. To remove, turn the Hex
Nut clockwise. To tighten, turn
the Hex Nut counterclockwise.
b. Remove the Left Safety Guard
Cover. Remove the Outside
Flange and Wheel Bushing.
c. Remove the old Bufng Wheel.
Install the new Bufng Wheel.
d. Replace the Wheel Bushing,
Flange, Left Safety Guard Cover,
Hex Nut, and Seal Ring.
4. To install a Grinding Wheel:
a. Remove the Right Safety Guard
Cover from the Grinder by
unscrewing and removng Hex Nut.
IMPORTANT: The Hex Nut on
the Grinding Wheel is a RIGHT
threaded Hex Nut. To remove, turn
the Hex Nut counterclockwise. To
tighten, turn the Hex Nut clockwise.
b. Remove the Right Safety Guard
Cover. Remove the Outer
Flange and Wheel Bushing.
c. Remove the old Grinding Wheel.
Install the new Grinding Wheel.
Do not overtighten the
Hex Nut. Excessive tightening
can cause the Grinding Wheel
to crack during operation.
d. Replace the Wheel Bushing,
Flange, Right Safety Guard
Cover and Hex Nut.
5. CAUTION! When replacing
the Bufng Wheel and/or Grinding
Wheel, make sure each wheel has
a minimum 3500 RPM rating.
6. To clean: Wipe with a damp cloth,
vacuum or use compressed air.
Do not use solvents. Do not immerse
any part of the Grinder in liquids.
7. When storing: Store the Grinder
in a safe, clean, dry, location
out of reach of children and
other unauthorized people.
8. CAUTION! All maintenance,
service, or repairs not listed in this
manual are only to be attempted
by a qualied service technician.
REV 11a