Owner's Manual

SKU 94071 For technical questions, please call 1-800-444-3353 PAGE 5
its intended function – check for
alignment of moving parts, binding
of moving parts, breakage of parts,
mounting, and any other conditions
that may affect its operation. A guard
or other part that is damaged should
be properly repaired or replaced.
19. DIRECTION OF FEED. Feed
work into a blade or cutter
against the direction of rotation
of the blade or cutter only.
20. NEVER LEAVE TOOL RUNNING
UNATTENDED. TURN POWER OFF.
GROUNDING INSTRUCTIONS
TO PREVENT
ELECTRIC SHOCK
AND DEATH FROM
INCORRECT GROUNDING
WIRE CONNECTION
READ AND FOLLOW THESE
INSTRUCTIONS:
110-120 V~ Grounded Tools:
Tools with Three Prong Plugs
1. In the event of a malfunction or
breakdown, grounding provides a
path of least resistance for electric
current to reduce the risk of electric
shock. This tool is equipped with an
electric cord having an equipment-
grounding conductor and a grounding
plug. The plug must be plugged into
a matching outlet that is properly
installed and grounded in accordance
with all local codes and ordinances.
2. Do not modify the plug provided
– if it will not t the outlet, have
the proper outlet installed by
a qualied electrician.
3. Improper connection of the
equipment-grounding conductor can
result in a risk of electric shock. The
conductor with insulation having
an outer surface that is green with
or without yellow stripes is the
equipment-grounding conductor. If
repair or replacement of the electric
cord or plug is necessary, do not
connect the equipment-grounding
conductor to a live terminal.
4. Check with a qualied electrician or
service personnel if the grounding
instructions are not completely
understood, or if in doubt as to
whether the tool is properly grounded.
5. Use only 3-wire extension cords
that have 3-prong grounding
plugs and 3-pole receptacles
that accept the tool’s plug.
6. Repair or replace damaged
or worn cord immediately.
125 V~ 3-Prong Plug and Outlet
(for up to 125 V~ and up to 15 A)
Grounding
Pin
7. This tool is intended for use on a
circuit that has an outlet that looks
like the one illustrated above in
125 V~ 3-Prong Plug and Outlet.
8. The tool has a grounding plug that
looks like the plug illustrated above
in 125 V~ 3-Prong Plug and Outlet.