Chipper Assembly and Operating Instructions

Chipper/Shredder. Use a stick to push the tree limbs, leaves, etc. into the
feed Hopper.
10. Make sure the plastic cover on the Hopper is closed when the machine is
running.
11. Always feed large branches slowly into the machine. Branches larger than
1-1/4” diameter should never be fed into the machine.
12. Do not allow processed material to build up in the discharge area. This may
prevent proper discharge and can result in kickback of material through the feed
Hopper.
13. If the machine becomes clogged, immediately turn off the Power Switch of
the unit. Unplug the unit from its electrical outlet. Wait until the Chipper/
Shredder comes to a complete stop. Then clear the machine of the clogged
material.
14. Do not allow children and other unauthorized people to handle or play with
the Chipper/Shredder. Never allow people or animals in the work area.
15. Do not force the Chipper/Shredder. This tool will do the work better and safer
at the speed and capacity for which it was designed.
SKU 95091 For technical questions, please call 1-800-444-3353 PAGE 6
16. WARNING! People with pacemakers should consult their physician(s)
before use. Electromagnetic fields in close proximity to a heart pacemaker could
cause pacemaker interference or pacemaker failure.
17. WARNING! The warnings and precautions discussed in this manual cannot
cover all possible conditions and situations that may occur. It must be understood
by the operator that common sense and caution are factors which cannot be built
into this product, but must be supplied by the operator.
REV 07f