Product manual

Page 2SKU 01110
For technical questions, please call 1-800-444-3353.
SPECIFICATIONS
Maximum Sheet Metal Capacity 16 Gauge Mild Steel
Air Inlet 1/4” NPT Female
Air Consumption 4 CFM @ 90 PSI
Recommended Air Pressure 90 PSI
Throat Depth 5/8”
Crimp Width 7/8”
Punch Size .19”
Hole Placement .287 (Hole Center to Edge of Workplace)
Head Rotation 360°
Tool Length 9-3/4”
Weight 3 lb
Save This Manual
You will need this manual for the safety warnings and precautions, assembly, oper-
ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Write the product’s serial number in the back of the manual near the assembly
diagram, or write month and year of purchase if product has no serial number. Keep this
manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
Keep your work area clean and well lit. 1. Cluttered benches and dark areas invite
accidents.
Keep bystanders, children, and visitors away while operating. 2. Distractions can
cause you to lose control. Provide barriers or shields as needed.
PERSONAL SAFETY
Stay alert. Watch what you are doing, and use common sense when operat-1.
ing. Do not use this Air Punch/Flange Tool while tired or under the influence