Product manual

Page 4SKU 01110
For technical questions, please call 1-800-444-3353.
SERVICE
Tool service must be performed only by qualified repair personnel. 1. Service or
maintenance performed by unqualified personnel could result in a risk of injury.
When servicing a tool, use only identical replacement parts. Follow instruc-2.
tions in the “Inspection, Maintenance, And Cleaning” section of this manual.
Use of unauthorized parts or failure to follow maintenance instructions may create
a risk damage to your project and/or personal injury.
SPECIFIC SAFETY RULES
Do not remove the Plate Guard (8).1.
Wear heavy-duty gloves and keep hands away from moving parts.2.
Use compressed air only. 3. Clean, dry, regulated compressed air at no more than
90 PSI. Never use oxygen, carbon dioxide, combustible gasses, or any other bottled
gas as a power source for this tool. Do not exceed 90 PSI.
Maintain labels and nameplates on the tool. 4. These carry important information.
If unreadable or missing, contact Harbor Freight Tools for a replacement.
Maintain a safe working environment. 5. Make sure there is adequate surrounding
workspace.
Avoid unintentional starting. 6. Make sure you are prepared to begin work before
attaching the air supply and pressing the Throttle Lever.
Never leave the tool unattended when it is plugged into an air supply. 7. Unplug
it from its air supply before leaving.
WARNING: The brass components of this product contain lead, a chemical 8.
known to the State of California to cause birth defects (or other reproductive
harm). (California Health & Safety code § 25249.5, et seq.)
Be sure to read and follow all safety warnings and instructions in the manual 9.
provided by the manufacturer of the air compressor you are using with this
Air Punch/Flange Tool.
Be aware of material thickness. 10. Never try to punch or flange material thicker than
16 gauge. Doing so may damage the tool and/or cause personal injury.
Material guide and support may be needed. 11. When working with large materials,
you may need the help of an assistant, or support stands (not included) in order to
maintain a straight flange or punch consistent holes.