Product manual

Manual Revised 11g

14 pc. Aluminum Polishing Kit

Item 98707

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-800-444-3353 as soon as possible.

Visit our website at: http://www.harborfreight.com

Email our technical support at: tech@harborfreight.com

this manual or any artwork contained herein may be reproduced in any shape

or form without the express written consent of Harbor Freight Tools. Diagrams

within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described

herein. Tools required for assembly and service may not be included.

PAGE 1
4 pc. Aluminum Polishing Kit Item 98707 Read this material before using this product. Failure to do so can result in serious injury. Save this manual. When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-800-444-3353 as soon as possible. Visit our website at: http://www.harborfreight.com Email our technical support at: tech@harborfreight.com Copyright© 2008 by Harbor Freight Tools®. All rights reserved.
PAGE 2
Polishing Instructions Specifications Description Part MAX RPM QTY 1. Remove deep scratches from the workpiece and clean thoroughly to remove any dirt, grease or oil. 1 4" Diameter Buffing Wheel 2,800 1 2. Clamp firmly in place. 2 2-1/2" Diameter Buffing Wheel 2,800 1 3 3" Diameter Polishing Wheel 2,800 1 4 2-1/4" L X 2" D to 1-1/4" D Tapered Buffer 2,800 1 3. Connect the chosen accessory (Part 1 11) to an electric drill (sold separately).