Product manual

20
NOTE: Please use the System/Help > About function to find out the
Product Serial No. and Register Password. For details, please refer to
the Section 5.11 About. Or, you could find the information on the pop-up
registration MessageBox (Figure 2.8).
6. Turn on the scan tool and wait 30 seconds for the registration message
to disappear. Then click on Update from the Home Screen to display the
Update window. Select the Exit button on the screen to shut down.
Figure 2.8: Exit Update program
7. Restart the scan tool to finish registration procedure.
B. Register on the scan tool
The first time you start the scan tool, it will pop up a message box to
advise user to register your tool, showing as follow. This message will
display 30 seconds each time you power the tool up until properly
registered.
Figure 2.9: Prompt box for registration-in Main Screen