Manualshelf

Product manual

ManualsBrandsHarbor Freight Tools ManualsDiagnosticHarbor Freight Tools AUTEL MaxiDAS Automotive Diagnostic and Analysis System
31323334353637383940
26
and power is to be supplied through cable connection to vehicle battery.
This type of connection generally requires the vehicle-specific OBD I
adapter and the 15-pin main cable. To connect the DB15 main cable or
another similar cable, please follow these steps:
1. Locate the required OBD I adapter and connect the adapter’s 15-pin
adapter to the cable’s 15-pin male adapter.
Figure 3.4: OBD I Adapter Connection to the DB15 Main Cable
2. Connect the cable’s 15-pin female adapter to the DB15 port on the top of
the scan tool. Finger tighten the connecting screws.
Figure 3.5: Main Cable Connection to the Scan Tool
3. Connect the main cable’s OBD I adapter into the vehicle’s DLC.