Product manual

33
vehicle one by one. Auto Scan will take a few minutes.
NOTE: The Control Unit option will list down all the systems that might
be available on the vehicle for you to select to test.
Do one of the following:
 To select Auto Scan, go to step 7 and then step 9.
 To select Control Unit, go to step 8 and then step 9.
7. Select Auto Scan, and the following screen will display:
Figure 3.17: Auto Scan System Menu Screen
NOTE: Users are allowed to check the details of each system, quickly
erase DTC, and display DTC from the Auto Scan system menu screen. To
select the functions on the right column of the screen, you need to click
once on a system for selection and click once on the function key. To
check the details of each system, you need to click twice on the system to
enter. Clicking once on a system will not lead to any option.
NOTE: When exiting viewing a system, the scan tool will once again
read the data and check the latest status of the system (i.e. a trouble code
has been erased in the system). Wait for the reading process to complete
before you make any selection, or the cursor will return to the system
being read.