Product manual

Page 2SKU 38471
For technical questions, please call 1-800-444-3353.
THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the
owner’s record below:
Model___________ Serial No._____________ Purchase Date_____________
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Technical Specifications
Tool Name: Compact Bender-Bench
Item Number: 38471
Dimensions: 10-1/8” W x 9-1/8” H x 53” L
Stand: .3000” Steel, 4-1/2” High
Mounting Holes: (4) ½”
Max. Width of Stock: 1-15/16”
Max. Stock Thickness: 5/16”
Max. Bar Stock Diameter: 5/8”
Dies: 1”, 1-1/4”, 1-1/2”, 1-3/4”, 2”, 2-1/2”, 3”
Tool Weight: 37.5 LBS.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this product!
1. Avoid working alone. If an accident happens, an assistant can bring help.
2. Keep work area clean. Cluttered areas invite injuries.
3. Observe work area conditions. Keep work area well lighted.
4. Keep children away. Children must never be allowed in the work area. Do not let them handle
machines, tools, or extension cords.
5. Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always
lock up tools and keep out of reach of children.
6. Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts.
Protective, electrically nonconductive clothes and nonskid footwear are recommended when working.
Wear restrictive hair covering to contain long hair.
7. Use eye and ear protection. Always wear ANSI approved impact safety goggles.
8. Do not overreach. Keep proper footing and balance at all times.
9. Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a
larger industrial tool. There are certain applications for which this tool was designed. Do not modify this
tool and do not use this tool for a purpose for which it was not intended.