Product manual

Page 3SKU 95803
For technical questions, please call 1-800-444-3353.
Do not store more than one bicycle at a time on the Bicycle Lift.
Do not exceed the weight bearing capacity of the surface this Bicycle Lift is
attached to. The surface must be able to support the 3.4 lb. weight of the Bike
Lift as well as the weight of the bicycle (which should not exceed 50 lb.)
Make sure the lift brackets are securely fastened during installation. Harbor
Freight Tools cannot be responsible for damage to your Bicycle, or personal
injury if this Bicycle Lift is not properly installed.
NEVER allow children to play with or use this Bicycle Lift.
Maintain labels and nameplates on the tool. These carry important information.
If unreadable or missing, contact Harbor Freight Tools for a replacement.
When lowering a Bicycle, do not let children or anyone else stand directly
underneath the Bicycle Lift.
Maintain a safe working environment. Make sure there is adequate surrounding
workspace. Do not use this product in a damp or wet location.
Do not use the Bicycle Lift to support anything except a bicycle.
Do not let people or animals hang from the Bicycle Lift.
Regularly check all pulleys and brackets for tightness.
Do not use Bicycle Lift if the rope begins to fray or if any part is chipped or
broken.
After installing and before first use, test the Bicycle Lift by using small sand-
bags (or similar items) that weigh no more than 50 lb. and are evenly distributed
between the front and back pulleys. This will show if the Bicycle Lift is installed
properly before a bicycle is stored on the unit.
The warnings and precautions discussed in this manual cannot cover all
possible conditions and situations that may occur. It must be understood by
the operator that common sense and caution are factors which cannot be built into
this product, but must be supplied by the operator.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
UNPACKING
When unpacking, check to make sure that the item is intact and undamaged. If any
parts are missing or broken, please call Harbor Freight Tools at the number shown on the
cover of this manual as soon as possible.