Product manual

ManualsBrandsHarbor Freight Tools ManualsRecreationHarbor Freight Tools Bicycle Lift

Page 7SKU 95803

For technical questions, please call 1-800-444-3353.

REMOVING THE BIKE FROM STORAGE

Unwrap the Rope (5) from the Rope Cleat (4). Even though the Bike should be held

secure by the Rope Lock to prevent it from falling, hang on to the Rope (5) securely

as an added safety precaution.

While maintaining tension on the Rope (5), pull it towards the Rear Lift Bracket (3A).

This will release the Rope Lock and the Bike can then be lowered slowly to a height

where it is comfortable for you to lift the Handlebars and Seat away from their re-

spective Hook Pulleys. Before removing the Bike from the Hook Pulleys, secure the

Rope (5) around the Rope Cleat (4) fo prevent the Bike from suddenly dropping.

After removing the Bicycle from the Bike Lift, raise the Hook Pulleys (3A & 3B) to

a height where they will not be at risk to anyone walking beneath them. Tie off the

excess Rope (5) by wrapping it around the Rope Cleat (4).

INSPECTION, MAINTENANCE, AND CLEANING

BEFORE EACH USE, inspect the general condition of the tool. Check for loose

screws, misalignment or binding of moving parts, cracked or broken parts, damage

or frayed strands on the Rope (5), and any other condition that may affect its safe

operation. If anything abnormal should occur, have the problem corrected before

further use. Do not use damaged equipment

MAINTENANCE CHART

Maintenance Type

Before

Use

After

Use

Weekly Monthly

Every 6

Months

Yearly

Inspect tool for damage

(see #1, above)

X X

Wipe off with clean, moist

cloth

X X

TROUBLESHOOTING

Problem Possible Causes Probable Solutions

Rope (5) binds or will

not pull smoothly

Rope has somehow slipped off of a

pulley.

Rope is frayed and broken strands

are imbedded around one of the

pulleys.

Pulleys may need some lubricating.

Check Rope (5), make sure it is on

each pulley.

Check the Rope (5) for fraying or

broken strands. If any damage is

found, Immediately replace the

Rope. DO NOT try to repair with

tape.

Lubricate Pulleys with a drop or two

of light oil (not included).