Vacuum Cleaner User Manual

INSTRUCTIONS AND PRECAUTIONS

Visit our website at: http://www.harborfreight.com

SAVE THESE INSTRUCTIONS. READ ALL

PRECAUTIONS AND INSTRUCTIONS.

2008 by Harbor Freight Tools

herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this document may not be drawn proportionally. Due to continuing improvements, actual product

may differ slightly from the product described herein. Tools required for assembly and service may not be included.

For technical questions or replacement parts, please call 1-800-444-3353.

SPECIFICATIONS

Ground clearance 2-1/8” H, 1” Low

Magnetic Pulling Force 9 Lbs.

Handle Length Adjusts from 37” to 51”

UNPACKING

When unpacking, check to make sure that

the item is intact and undamaged. If any parts are

missing or broken, please call Harbor Freight Tools

at the number shown on the cover of this document

as soon as possible.

22” MAGNETIC FLOOR SWEEPER

WITH RELEASE

98399

Revised Manual 10h

PAGE 1
22” magnetic floor sweeper with release 98399 Instructions and precautions Visit our website at: http://www.harborfreight.com Save these instructions. Read all precautions and instructions. Copyright© 2008 by Harbor Freight Tools®. All rights reserved. No portion of this document or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this document may not be drawn proportionally.
PAGE 2
Important SAFETY Information Assembly Figure 1 Sweeper Handle (3) Assembly Precautions 1. Assemble only according to these instructions. Improper assembly can create hazards. 2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly. 3. Keep assembly area clean and well lit. 4. Keep bystanders out of the area during assembly. 5. Do not assemble when tired or when under the influence of drugs or medication. Use Precautions 1. This product is not a toy.
PAGE 3
Figure 3 Parts List & assembly diagram Part 4. To release the material that has been picked up by the Magnetic Sweeper, place Housing (1) over a trash can or desired debris destination. Pull up on the Housing Handle as shown in Figure 3, above. Description 1 Housing Qty.