Product manual

ManualsBrandsHarbor Freight Tools ManualsWelding AccessoriesHarbor Freight Tools CO2/Argon Regulator Gauge

FLOW GAUGE REGULAFLOW GAUGE REGULA

FLOW GAUGE REGULA

TORTOR

TOR

C0C0

AND ARGON AND ARGON

AND ARGON

ASSEMBLY AND OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www.harborfreight.com

manual or any artwork contained herein may be reproduced in any shape or form

without the express written consent of Harbor Freight Tools.

For technical questions and replacement parts, please call 1-800-444-3353

94841

Due to continuing improvements, actual product may differ slightly from the product described herein.

Summary of content (7 pages)

PAGE 1
FLOW GAUGE REGULA TOR REGULATOR C02 AND ARGON 94841 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. ® 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright © 2006 by Harbor Freight Tools®. All rights reserved.
PAGE 2
Specifications Item Application Material Valve Control Discharge Fitting Bottle Thread Maximum Inlet Pressure Overall Dimensions Output Gauge Markings Tank Gauge Markings Description Light and medium duty MIG/TIG welding Cast brass with steel body gauge and chromeplated regulator; durable phenolic PVC knob Single turn knob 9/16" x 18 TPI male 580 CGA Connection (Argon bottles only) 230-Bar/3335.
PAGE 3
5. Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. There are certain applications for which this tool was designed. It will do the job better and more safely at the rate for which it was intended. Do not modify this tool and do not use this tool for a purpose for which it was not intended. 6. Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts.
PAGE 4
Warning: This product contains or produces a chemical known to the State of California to cause cancer and birth defects (or other reproductive harm). (California Health & Safety Code 25249.5 et seq.) Welding Safety Warnings and Precautions 1. Do not use welding and heating apparatus until a qualified instructor demonstrates the proper procedures and safety precautions. 2. Welding apparatus improperly operated, maintained or repaired can be dangerous.
PAGE 5
14. Ventilate welding work areas adequately. Maintain sufficient air flow to prevent accumulation of explosive or toxic concentrations of gases. Welding or cutting operations using certain combinations of metals, coatings, and gases generate toxic fumes. Use respiratory protection equipment in these circumstances. When welding or brazing, read and understand the Material Safety Data Sheet for the welding or brazing alloy. 15.
PAGE 6
Caution: If the valve is opened too much, the high pressure of the escaping gas can tip the cylinder over if not properly secured. When “cracking”, do not stand in front of the valve. 4. Attach the Regulator to the argon or CO2 cylinder. If required, use the supplied Adapter Fitting. Verify that the regulator is not contaminated with dirt, oil, or grease, and that the threads are not damaged. Do not use if contaminated, or if the threads are damaged.
PAGE 7
Caution: Never attempt to tighten a cylinder valve. If the cylinder valve is leaking, place the cylinder outdoors and notify the supplier immediately. 9. Optionally, install a flow check valve (not included) on the regulator. Connecting Hose Caution: Examine the hoses carefully before each use. If there are cuts, burns, worn areas, or damaged fittings, replace or properly repair the hose. 1. Connect the hose to the regulator Outlet Fitting and tighten the connection firmly with an open-end wrench.