Specifications Page 2 Continuous Power 80 Watts Input Voltage 12 Volts Nominal DC Output Voltage 120VAC/60Hz Fuse 7.5A (Tube Type) Indicator Green LED = power on Output Wave Form Modified Sine Wave Outlets 1 - 120V grounded AC 1 - USB 5VDC, 500mA Features - Overload Shutoff @ 100W - Over Voltage Shutoff @ 15.5VDC - Low Voltage Shutoff @ 10.5VDC For technical questions, please call 1-888-866-5797.
Important Safety Information 1. This product is not a toy. Keep it away from children. 9. Delicate device, handle with care. Do not drop or strike this item. 2. Use as intended only. 10. Do not open housing. Contains no user-serviceable parts. Internal parts may be electrified, even with unit off and power disconnected. 3. Inspect before every use; do not use if parts are loose or damaged. 4. Maintain product labels and nameplates. These carry important safety information.
14. Leave this device unplugged whenever the car’s engine is turned off. To help prevent draining and perhaps damaging the battery, only plug this device in while the car’s engine is on. 15. Switch any device to be powered off before plugging into this device. 16. Stay alert. Do not use while tired or under the influence of drugs, alcohol, or medication. 17. Store idle equipment. When not in use, this product must be stored in a dry location to inhibit rust. 18.
Operating Instructions Read the entire Important Safety Information section at the beginning of this document including all text under subheadings therein before set up or use of this product. 1. Move the vehicle outside any enclosed structure. Turn on the vehicle’s engine. 2. Plug the Inverter into the cigarette lighter socket. The green LED power indicator will light up. 3. To power a device or appliance: NOTICE: Some rechargeable appliances may damage the Power Inverter or the appliance.
Maintenance Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Disconnect all loads from the inverter before performing any procedure in this section. TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use. 1. BEFORE EACH USE, inspect the general condition of the tool. Check for: a.
3. If the fuse needs replacing: a. Disconnect the Inverter from the cigarette lighter type outlet. b. Unthread the end of the Cigarette Outlet Adapter, turning the end counterclockwise. The pieces are spring tensioned, so take care to keep from losing parts during disassembly. c. Remove the spent fuse and replace with a new fuse. d. Make sure all parts are in the proper order.
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
