Product manual

Page 4SKU 38661 For technical questions, please call 1-800-444-3353.
OPERATION
Never force the tool or attachment to do the work of a larger industrial tool. It is
designed to do the job better and more safely at the rate for which it was in-
tended.
The Corner Clamp can also be mounted to a workbench via holes in center por-
tion of Clamp.
Do not overtighten Clamp as this may result in damage to work piece or Clamp.
With Screw set so that Jaw is open to Maximum capacity, set the work piece in
the Jaw openings. Press down the Quick Release button (colored button on top
corners of the Clamp) and move the Clamp to the approximate position needed
to Clamp the work piece.
Turn Handle clockwise to tighten the Clamp onto the work piece. Make certain
the Clamp sits securely on the work piece and make nal turns until the Clamp is
rmly tightened.
For any minor adjustments, turn the handle counterclockwise to loosen the
Clamp. The Quick Release can be used to loosen the Clamp Screw so that it will
slide some or all of the way to the back of the Clamp opening.
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
•
•
•
1.
2.
3.