Product manual

ManualsBrandsHarbor Freight Tools ManualsElectricalHarbor Freight Tools Digital Timer

DIGITAL TIMER FOR

LAMPS AND APPLIANCES

95205

SET UP AND OPERATING INSTRUCTIONS

Distributed exclusively by Harbor Freight Tools

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our website at: http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

2006 by Harbor Freight Tools

herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product

may differ slightly from the product described herein. Tools required for assembly and service may not be included.

For technical questions or replacement parts, please call 1-888-866-5797.

REV 14i

Summary of content (5 pages)

PAGE 1
DIGITAL TIMER FOR LAMPS AND APPLIANCES 95205 SET UP AND OPERATING INSTRUCTIONS REV 14i Distributed exclusively by Harbor Freight Tools®. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL. Copyright© 2006 by Harbor Freight Tools®. All rights reserved.
PAGE 2
TECHNICAL SPECIFICATIONS Power Source: Time Display: Overall Dimensions: Net Weight: LCD Display: Functions: 115VAC60Hz Military Time (24 hour clock) 3-1/2” W X 3” H X 3” D .
PAGE 3
Warning: The warnings, cautions, and instructions discussed in this manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. UNPACKING When unpacking your Digital Timer, check to make sure that the product is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at: 1-888-866-5797.
PAGE 4
3. To set the Day of the Week: Press CLOCK and WEEK. The display will scroll through each day of the week. Release the buttons once correct weekday is displayed Setting the Timer 1. To set the time for Digital Timer to turn “ON”: Insert the plug of the lamp or appliance into either of the outlets on the sides of the Timer. Press PROGRAM to begin. The Timer will display “1 ON”. Press HOUR, MIN and WEEK to set the hour, minute and day of the week that you want the Digital Timer to activate. 2.
PAGE 5
3. Pressing the On-Auto-Off button to the AUTO setting will set the Timer to turn ON and OFF at selected intervals. 4. Pressing the On-Auto-Off button to the OFF setting will turn the Timer OFF. Options for Setting Day(s) of the Week During the Timer On/Off Setting mode, as shown on page 3-”Setting the Timer”, do the following: 1. To set the Timer to go on DAILY: Press “WEEK” once. The display will show Mo-Tu-We-Th-FrSa-Su. 2.