Product manual

SKU 99823 For technical questions, please call 1-800-444-3353. Page 2
SAVE THIS MANUAL
Keep this manual for the safety
warnings and precautions, assembly,
operating, inspection, maintenance and
cleaning procedures. Write the product’s
serial number in the back of the manual
near the assembly diagram (or month
and year of purchase if product has no
number). Keep this manual and the
receipt in a safe and dry place for future
reference.
IMPORTANT SAFETY
INSTRUCTIONS
In this manual, on the labeling,
and all other information
provided with this product:
This is the safety alert
symbol. It is used to alert
you to potential personal
injury hazards. Obey all
safety messages that
follow this symbol to avoid
possible injury or death.
DANGER indicates
a hazardous
situation which, if not
avoided, will result in death or
serious injury.
WARNING
indicates a
hazardous situation which, if
not avoided, could result in
death or serious injury.
CAUTION, used
with the safety
alert symbol, indicates a
hazardous situation which, if
not avoided, could result in
minor or moderate injury.
NOTICE is used to
address practices
not related to personal injury.
CAUTION, without
the safety alert
symbol, is used to address
practices not related to
personal injury.
READ AND UNDERSTAND ALL
INSTRUCTIONS
When using electrical tools,
safety precautions should
always be followed including the
following:
Work Area Safety
Do not use outdoors.1.
Close supervision is necessary when 2.
any tool is used by or near children.
Do not let cord hang over edge 3.
of table or counter, or touch hot
surfaces.
Do not place on or near a hot gas or 4.
electric burner, or in a heated oven.
Extreme caution must be used when 5.
moving an tool.
Keep the work area well lit. Make 6.
sure there is adequate surrounding
workspace. Keep the work area free
of obstructions and other debris.