Product manual

Page 3For technical questions, please call 1-800-444-3353.Item 60544
Instructions
1. Attach the upper Safety Hook to a
rope, chain or another structure that
will fully support at least 150 lb.
WARNING! All 3 parts of the Safety Hook
must be engaged to the supporting rope,
chain, or structure. Failure to engage the
hook properly could cause serious injury.
2. When setting up the Rope Hoist,
note the difference in the
Upper and Lower Hoist,
(see photo at right). The Lower Hoist
includes the end-of-rope locking device.
Always connect this Lower Hoist to
the object being lifted or pulled.
3. With the upper Safety Hook supporting
the Rope Hoist, inspect and test
the Rope Hoist before attempting
to lift the workpiece. Make sure the
rope is in good condition and is not
kinked or twisted between the hoists.
Pull the loose pulling rope to make sure
the hoists are functioning properly.
4. Connect the 3 parts of the lower
Safety Hook to a supporting chain,
rope or other connecting device
that is supporting the workpiece
to be lifted or pulled.
WARNING! Maintain safe work area.
Before and during the lift, keep spectators
clear of the work area. Keep clear of the
area under the lifted item at all times.
5. Carefully pull the loose Pulling Rope
and slowly lift or pull the workpiece.
Tension must be maintained on
the loose Pulling Rope to keep the
workpiece aloft. After the workpiece is
in the desired position, it can be lowered
by slowly and carefully releasing
tension in the loose Pulling Rope.
6. After the lift or pull is complete,
safely support the workpiece and
disconnect the Rope Hoist.
Parts List and Diagram
Part Description Qty.
1 Hoist, Upper/Lower 2
2 Safety Hook (3 pc. set) 2
3 Rope Locking Device 1
4 Rope 1
Upper
Hoist (1)
Safety
Hook (2)
Lower
Hoist (1)
End-of-Rope
Locking
Device (3)
Safety
Hook (2)
Rope (4)
Loose
Pulling
Rope
Record Serial Number Here:
Note: If product has no serial number,
record month and year of purchase instead.
Note: Some parts are listed and shown
for illustration purposes only, and are not
available individually as replacement parts.