Product manual
Page 2 For technical questions, please call 1-800-444-3353. SKU 95670
Specications
Electrical
Requirements
One 9V battery
Fuse F250mA L 250V
Display LCD 3.5 digits (to 1999)
V~ Testing
Frequency
45 to 450 Hz
Accuracy
See individual test
operating sections
Save This Manual
Keep this manual for the safety warnings
and precautions, assembly, operating,
inspection, maintenance and cleaning
procedures. Write the product’s serial
number in the back of the manual near
the assembly diagram (or month and year
of purchase if product has no number).
Keep this manual and the receipt in a
safe and dry place for future reference.
IMPORTANT SAFETY
INFORMATION
In this manual, on the labeling, and all other
information provided with this product:
This is the safety alert symbol. It is
used to alert you to potential
personal injury hazards. Obey all
safety messages that follow this symbol to
avoid possible injury or death.
DANGER indicates a hazardous
situation which, if not avoided, will
result in death or serious injury.
WARNING indicates a hazardous
situation which, if not avoided, could
result in death or serious injury.
CAUTION, used with the safety
alert symbol, indicates a hazardous
situation which, if not avoided, could
result in minor or moderate injury.
NOTICE is used to address practices
not related to personal injury.
CAUTION, without the safety alert
symbol, is used to address practices
not related to personal injury.
General Safety Warnings
WARNING Read all safety
warnings and instructions.
Failure to follow the warnings and
instructions may result in electric
shock, re and/or serious injury.
Save all warnings
and instructions
for future reference.
1. Electrical shock can cause death
or injury! NEVER TOUCH exposed
conductors of electricity.
2. Inspect the Multimeter/
Tachometer before use. In
addition to a general inspection,
carefully check the following:
a. Pay special attention to the
insulation protecting the connectors.
b. Check the leads for exposed metal,
damaged insulation, and continuity.
c. Replace damaged test lead
immediately, before use.