Product manual

Page 6 For technical questions, please call 1-800-444-3353. SKU 95670
General Operating
Instructions
Use the following instructions to measure
and test using the Multimeter/Tachometer.
Controls
POWER Button - Used to turn the power
on and off. Press the POWER Button to
turn the power on. Press the POWER
Button again to turn the power off.
HOLD Button - Used to freeze a reading
on the LCD screen. Press the HOLD
button to lock the present reading
on the LCD. Press the HOLD button
again to release the LCD reading.
Function/Range Switch - Used to select
the desired function of the meter. Rotate
the dial to select the desired function.
Jack Sockets - Used to connect
the positive and negative test leads.
Insert the red and black test leads
into two of the Jack sockets as
instructed for the desired reading.
Transistor hFE Testing Socket - Used
when testing transistors. Insert the three
pins of the transistor into the socket
to test and determine the current.
Temperature Testing Socket - Used
to measure temperature. Insert one end
of the thermocouple into the socket and
touch the object to be measured with
the other end to read the temperature.
Frequency
pg. 9
Dwell
Angle
pg. 11
DC
Current
pg. 8
AC Voltage
pg. 7
DC
Voltage
pg. 7
Transistor
pg. 14
Tachometer/RPM
pg. 12-13
Resistance, Diode
and Continuity
pgs. 9-11
Temperature
pg. 14
200
2k
Hz
20k
2
20
200
1000
750
200
hFE
8CYL
6CYL
5CYL
4CYL
3CYL
3CYL
4CYL
5CYL
6CYL
8CYL
10
20m
200m
ºF
ºC
20k
20M
200m
2M
200k
Temperature
Testing
Socket
LCD
Function/
Range
Switch
Power
Button
Hold
Button
Transistor
hFE
Testing
Socket
General Jack
( )
Red
Common
(COM) Jack
Black
Milliamp Jack
Red
Amp Jack
Red