Product manual

SKU 98488 For technical questions, please call 1-800-444-3353. Page 2
Specications
Dual purpose stand to balance mounted tires.
Accepts up to 13-7/8” W tires, 12-1/2” wide
hubs and 1.59”/15 mm to 1.46”/37 mm axles.
The following Adapters (not included) are
available from Harbor Freight Tools:
SKU 98489
Balance Adapter to
be used for Ducati
® Motorcycles
SKU 98490
Balance Adapter to
be used for BMW®
Motorcycles
SKU 98493
Balance Adapter to
be used for Harley
Davidson® Motorcycles
SKU 65079
Balancer adapter to
be used for Honda®
motorcycles.
SKU 623 1” Travel Machinist’s
Dial Indicator
SKU 33675 1’’ Dial Indicator
SKU 5645 Multipositional
Magnetic Base with
Fine Adjustment
IMPORTANT SAFETY
INFORMATION
Assembly Precautions
1. Assemble only according
to these instructions.
Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and
heavy-duty work gloves during assembly.
3. Keep assembly area clean and well lit.
4. Keep bystanders out of the
area during assembly.
5. Do not assemble when tired or when under
the inuence of drugs or medication.
Use Precautions
1. This product is not a toy. Do not allow
children to play with or near this item.
2. Use for intended purpose only.
3. Inspect before use; do not use if
parts are loose or damaged.
4. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
Assembly Instructions
Read the ENTIRE IMPORTANT
SAFETY INFORMATION section at the
beginning of this document including
all text under subheadings therein
before set up or use of this product.
Assembly
1.
Side
Frame (2)
Socket Head Screw (9)
Figure 1
Attach each Side Frame (2) to the Base (1):
With the face of the Side Frame (2) facing
inward, insert two Socket Head Screw
(9) down through the Side Frame and
through the Base (1). Secure in place
with two Lock Nuts (10)-see Figure 1.
Below are accessories needed for wheel aligning.
(All not included)
REV 08f